|
Gordon McKay
- High Voltage teminations for Sims Metal
- Mill Motor upgrade. Consisted of
- New 22kV circuit breakers for the existing 22/11kV tranformer and the new 22/11kV transformer which is dedicated to the new Mill Motor.
- New 11kV motor strat cubical for protection of the Mill Motor which consists of the piggy-back of the RSDI terminations for the power factor correction unit and the Mill Motor isolator.
- New Liquid reostat 6.6kV for starting of the Mill Motor, which is connected to the rotor of the Mill Motor.
- New 11kV Mill Motor terminations to starter and rotor.
- Testing of installation was conducted with our VLF test set which we detected a fault with a boot on the 22kV which failed at 6kV
|
|
|
|
John Holland - Tunnelling
- Palmer Street main drain diversion. 950m, 1800mm pipe jack tunnel (Richmond Herrenknecht)
- High Voltage supply 11kV/415 2,000Amps
- Dromana site establishment
|
|
|
|
McConnell Dowell
- M40 storm water upgrade in Yarra Gardens, Richmond
- 480m/800mm pipe jack (Herrenkecht)
- Tunnel Slurry
- Narre Warren
- Site establishment and works with management for power shut-down of Cranbourne Road, Narre Warren
to install generators for supply to customers
|
|
|
|
MCF
- High Voltage operation on ship for shore power for reclaim of cement on the galiath
|
|
|
|
Jetstar
- Installation of 22kV supply from overhead supply, underground to a 315kVA substation to supply the terminal at Avalon
|
|
|
|
Linfox Aviation, Avalon
- Test all cables, earth systems and 300kVA substation for resation of power to F18 testing area
|
| |
|
